Find Gas Boiler Heat Exchanger, Space Saving Sprial Plate Heat Exchanger, Sus 316 Plate Heat Exchanger on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Heat Exchanger > gas boiler space saving sprial plate heat exchanger
gas boiler space saving sprial plate heat exchanger
  • gas boiler space saving sprial plate heat exchanger
  • gas boiler space saving sprial plate heat exchanger

gas boiler space saving sprial plate heat exchanger

Product Description

gas boiler space saving sprial plate sus 316 plate Heat Exchanger

The equipment is made of two coils, forming two uniform spiral channels. The two kinds of heat transfer media can carry out full counter current flow, greatly enhancing the heat transfer effect. Even if two kinds of medium with small temperature difference can achieve the ideal heat exchange effect.

Because the curvature of the spiral channel is uniform, the liquid flow in the equipment has no large turning direction, and the total resistance is small. Therefore, the design flow rate can be increased to make it have higher heat transfer capacity.

The end face of spiral channel of type I non detachable spiral plate heat exchanger adopts welding seal, so it has high sealing performance.

The structural principle of type II detachable spiral plate heat exchanger is basically the same as that of non detachable heat exchanger, but one of the channels can be disassembled for cleaning, especially for heat exchange with viscous and precipitated liquid.

The structural principle of type Ⅲ detachable spiral plate heat exchanger is basically the same as that of non detachable heat exchanger, but its two channels can be disassembled for cleaning, so it can be widely used.

According to the nominal pressure, spiral plate heat exchanger can be divided into pn0.6, 1.0, 1.6 and 2.5MPa (refers to the maximum working pressure that single channel can bear). According to the material can be divided into carbon steel and stainless steel. Users can choose according to the actual process.

When a single equipment can not meet the requirements, it can be used in combination with multiple devices, but the combination must meet the following requirements: parallel combination, series combination, and the distance between equipment and channel is the same. Hybrid combination: one channel in parallel, one channel in series.



Structure and performance of spiral plate heat exchanger:

1. The equipment is made of two coils, forming two uniform spiral channels. The two kinds of heat transfer media can carry out full counter current flow, greatly enhancing the heat transfer effect. Even if two kinds of medium with small temperature difference can achieve the ideal heat exchange effect.

2. Because the curvature of the spiral channel is uniform, the liquid flow in the equipment has no large turning direction, and the total resistance is small. Therefore, the design flow rate can be increased to make it have higher heat transfer capacity.

3. The end face of spiral channel of type I non detachable spiral plate heat exchanger adopts welding seal, so it has high sealing performance.

4. The structural principle of type II detachable spiral plate heat exchanger is basically the same as that of non detachable heat exchanger, but one of the channels can be disassembled for cleaning, especially for heat exchange with viscous and precipitated liquid.

5. The structural principle of type III detachable spiral plate heat exchanger is basically the same as that of non detachable heat exchanger, but its two channels can be disassembled for cleaning, so it can be widely used.

6. According to the nominal pressure, spiral plate heat exchanger can be divided into pn0.6, 1.0, 1.6 and 2.5MPa (refers to the maximum working pressure that single channel can bear). According to the material can be divided into carbon steel and stainless steel. Users can choose according to the actual process.

7. When a single equipment can not meet the requirements, it can be used in combination with multiple devices, but the combination must meet the following requirements: parallel combination, series combination, and the same distance between equipment and channel. Hybrid combination: one channel in parallel, one channel in series.

Some specifications of heat exchangers are listed as follows:

Stainless acid resistant steel pn0.6, 1.6Mpa non detachable (type I) spiral plate heat exchanger, carbon steel Pg6, 16KG / cm2 non detachable (type I) spiral plate heat exchanger


sus 316 plate heat exchanger sus 316 plate heat exchangersus 316 plate heat exchangersus 316 plate heat exchangersus 316 plate heat exchangersus 316 plate heat exchanger


gas boiler space saving sprial plate heat exchanger


Wuxi Dingfeng pressure vessel Co., Ltd

  • 1
  • 2
  • 3
  • 4
 

Wuxi Dingfeng pressure vessel Co., Ltd. specializes in the production of reactor, evaporator, stainless steel reactor, stainless steel reactor, scraper evaporator, Heat Exchanger, tubular heat exchanger, spiral plate heat exchanger. Our company has the first, second and third class pressure vessel manufacturing license and passed the ISO9001:2000 international quality system certification. Our factory has established long-term technical cooperation with Wuxi Chemical Design Institute, Jiangnan University, Shanghai Chemical Design Institute and 702 Institute of China shipbuilding industry group. As long as we are engaged in the design, manufacturing, installation, debugging and process technology development of petroleum, chemical, biological and pharmaceutical equipment, technology transfer and related technical consultation and service.


At present, the factory has fixed assets of 85 million yuan, covers an area of 28000 square meters, and modern large-scale industrial plants of 21000 square meters. At present, there are 197 employees, including 60 engineering technicians, 35 technicians in design, process, material, welding and quality inspection, including 4 senior engineers, 16 engineers and 9 assistant engineers. Give full play to the professional skills and innovation ability of all employees, and use the computer-aided system (CAD, 3D3S, SW6) to carry out personalized product design and production according to different products and processes of users, so as to meet the needs of users for diversified and high-quality products.

Company Info
  • Company Name: Wuxi Dingfeng pressure vessel Co., Ltd
  • Product/Service: Reaction kettle , Film evaporator , Pipe bundle condenser , Tubular heat exchanger , Distillation tower , Alcohol recovery tower
  • Contact Person: Mr. zhang
  • Tel: 86-510-80751588
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters